Basic Configuring By The Administrator - Sony SNC-RZ25N User Manual

Basic Configuring by the
Administrator
You can monitor the image of the camera only logging
in with the initial condition of this network camera. You
can also set various functions according to the install
position, network condition or purpose of the camera.
We recommend you configure the following items
before monitoring the image from the camera.
Setting contents
Flip the image according to the installation position (desk top or ceiling).
Set the format of the image sent from the camera (MPEG 4 or JPEG).
Select the white balance mode according to the installing position (indoor or
outdoor).
Select the brightness of the image sent from the camera.
Select the quality of the image sent from the camera.
Select the size of the image sent from the camera.
Select weather the audio from the external microphone is sent or not.
Accord date and time of the camera with those of the computer.
Make the setting for sending the monitor image attached to a mail.
Set the access right of the user for the camera.
Set a place to see beforehand.
Prepare a panorama image.
Setting menu
Image flip (page 35)
Video mode (page 34)
White balance (page 36)
Exposure mode (page 36)
Brightness (page 37)
MPEG4 Tab (page 38)
JPEG Tab (page 38)
Image size (page 35)
Microphone (page 36)
Date & time Tab (page 32)
e-Mail (SMTP) setting Menu (page 46)
Security setting Menu (page 45)
Preset positin setting Menu (page 63)
Creating a Panorama Imgae (page 71)

Basic Configuring by the Administrator

13