When It's Time To Empty The Tank-in-Tank
NOTE: Remove the Tank-in-Tank, following steps 1.
Carry the Tank-in-Tank, like a bucket, to the sink.
1.
Remove tank lid. Pour out dirty water.
After each use, remove and rinse the lint screen
2.
located on the tank lid.
Refill with cleaning solution and clean tap
3.
water—follow steps 4. on page 7.
When a cleaning job is complete, rinse out the
4.
Tank-in-Tank by running clean water between the
bladder and the tank.
Return the Tank-in-Tank to the machine, follow
5.
step 5 on page 7.
Refer to the Storage section on page 14 for
6.
final cleanup.
8
and 2. on page 7.
Remove tank lid.
A.
Remove lint screen and rinse under tap.
B.
Remove any debris caught in lint screen.
Reinsert lint screen on tank lid. The screen
C.
will click into place.
Replace tank lid.
D.
1
2
Lint Screen
5
Latched
Tip:
A special red float device in the
tank will cause the cleaner to
stop removing solution from the
carpet and the motor sound will
rise in pitch to let you know the
dirty water tank is full.