Step 3: Adjusting the Picture Position
Project an image on the screen and then adjust the picture position.
Remote control detector
Tip
?
1
The
/
(ON/STANDBY), INPUT, LENS, MENU, and M/m/</,/ENTER (joystick) buttons on
the side panel of the projector function the same as those on the remote control.
Note
Depending on the installation location of the projector, you may not control it with the remote
control. In this case, point the remote control to the screen instead of the projector.
5,6,7
Lights in red.
1
ON/STANDBY indicator
LIGHT
INPUT
DYNAMIC
STANDARD
CINEMA
PICTURE MODE
USER 1
USER 2
USER 3
ENTER
LENS
ADJ PIC
MENU
1
After connecting the AC cord to
the equipment, plug the AC
code into a wall outlet.
The ON/STANDBY indicator lights
in red and the projector goes into
standby mode.
4
2
21