Selecting The Picture Viewing Mode - Sony VPL-VW50 Operating Instructions Manual

Selecting the Picture Viewing Mode

You can select the picture viewing mode that best suits the type of program or room
conditions.
LIGHT INPUT
DYNAMIC STANDARD CINEMA
PICTURE MODE
USER 1 USER 2 USER 3
ENTER
LENS ADJ PIC MENU
WIDE MODE RCP RESET
REAL COLOR PROCESSING
BRIGHT CONTRAST
32
PICTURE MODE
buttons
DYNAMIC
STANDARD
CINEMA
USER 1, USER 2
and USER 3
Press one of the
PICTURE MODE buttons
(DYNAMIC, STANDARD,
CINEMA and USER 1, USER 2
and USER 3).
DYNAMIC
Enhances picture contrast and sharpness.
STANDARD
The quality of the picture becomes less
rough than the one selected by
"DYNAMIC".
CINEMA
Recommended when viewing a movie in
the dark place.
USER 1, USER 2 and USER 3
You can adjust the quality of the picture to
suit your taste and store the settings into
the selected memory of the projector.
Press one of the USER 1, USER 2 and
USER 3 buttons, then adjust the picture
by using the buttons on the remote control
or the menus (1 pages 33 and 41). The
settings are stored, and you can view the
picture with the adjusted picture quality
by pressing the button.