Sony VPL-VW50 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projector
  5. VPL VW50 - SXRD - Projector
  6. Operating instructions manual

Sony VPL-VW50 Operating Instructions Manual

Video projector
Hide thumbs Also See for VPL-VW50:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
2-887-661-11 (1)
Video Projector
Operating Instructions
VPL-VW50
© 2006 Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony VPL-VW50

Summary of Contents for Sony VPL-VW50

  • Page 1 2-887-661-11 (1) Video Projector Operating Instructions VPL-VW50 © 2006 Sony Corporation...
  • Page 2 For customers in the USA If you have any questions about this product, you may call: Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/ The number below is for FCC related matters only. Declaration of Conformity Trade Name: SONY Model No.: VPL-VW50...
  • Page 3 Disposal of Used Lamp This projector’s lamp contains mercury and should be disposed of properly. Consult your local authorities regarding safe disposal. The material contained in this lamp are similar to those of a fluorescent lamp, so you should dispose of it in the same way. For customers in the United States This product contains mercury.
  • Page 4 For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. Voor de klanten in Nederland Gooi de batterij niet weg maar lever deze in als klein chemisch afval (KCA). The socket-outlet should be installed near the equipment and be easily accessible. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT...

  • Page 5: Table Of Contents

    Table of Contents Precautions ...7 Location of Controls Front/Right Side ...8 Rear/Bottom ...9 Remote Control ...10 Connections and Preparations Unpacking ...11 Step 1: Installing the Projector ...12 Before Setting Up the Projector ...12 Positioning the Projector and a screen ...14 Step 2: Connecting the Projector ...17 Connecting to a VCR ...17 Connecting to a Computer ...20...
  • Page 6 Others Troubleshooting ... 53 Warning Indicators ... 55 Message Lists ... 56 Replacing the Lamp and the Air Filter and cleaning the Ventilation holes (intake) ... 57 Cleaning the Air Filter ... 60 Specifications ... 61 Preset Signals ... 63 Input Signals and Adjustable/ Setting Items ...

  • Page 7: Precautions

    Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further.

  • Page 8: Location Of Controls

    Location of Controls Front/Right Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. LENS button (1 page 22) M/m/</, (arrow)/ENTER button (1 page 37) MENU button (1 page 37) INPUT button (1 page 28) (ON/STANDBY) switch (1 page 22) Remote control detector (1 page 21)

  • Page 9: Rear/Bottom

    Rear/Bottom Ventilation holes (intake) (1 page 13) Remote control detector (1 page 21) Ventilation holes (intake) (1 page 13) Ventilation holes (intake) Ventilation holes (intake) Ventilation holes (intake) Lamp cover Adjusters Filter holder Ventilation holes (intake) Projector suspension support attaching hole...

  • Page 10: Remote Control

    Remote Control INPUT button (1 page 28) LIGHT button Illuminates the buttons on the remote control. PICTURE MODE buttons (1 page 32) ADJ PIC button (1 page 33) LENS button (1 page 22) WIDE MODE button (1 page 30) BRIGHT +/– button (1 page 33) Infrared transmitter LIGHT...

  • Page 11: Connections And Preparations

    Connections and Preparations This section describes how to install the projector and screen, how to connect the equipment from which you want to project the picture, etc. Unpacking Check the carton to make sure it contains the following items: • Remote control (1) and Size AA (R6) batteries (2) •...

  • Page 12: Step 1: Installing The Projector

    Step 1: Installing the Projector The projector displays pictures output from a VCR or other device. The lens shift allows you to have broader options for placing the projector and viewing pictures easily. Before Setting Up the Projector Unsuitable installation Do not place the projector in the following situations, which may cause malfunction or damage to the projector.
  • Page 13 Improper use Do not do any of the following while using the projector. Blocking the ventilation holes. Ventilation holes (intake) Ventilation holes (exhaust) For details on the location of the ventilation holes (intake or exhaust), see “Location of Controls” on pages 8 to 9. Tilting front/rear and left/right 15°...

  • Page 14: Positioning The Projector And A

    Positioning the Projector and a screen The installation distance between the projector and a screen varies depending on the size of the screen. Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector with the center of the lens within the areas indicated in the gray areas in the illustration.
  • Page 15 When using the 16:9 aspect ratio screen Screen size (inches) 1212 1842 2472 (minimum) 2105 3181 4257 (maximum) (125 (167 To calculate the installation measurements (SS: Screen Size) a (minimum) = 31.5 (1 ) × SS – 48.2 (1 b (maximum) = 53.8 (2 ) ×...

  • Page 16: Screen

    Position the projector so that the lens is parallel to the screen. Top view Screen Project an image on the screen and adjust the picture so that it fits the screen. (1 page 21) To project an image, connect video equipment to the projector. (1 page 17) Note When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the projector or the zooming magnifications.

  • Page 17: Step 2: Connecting The Projector

    Step 2: Connecting the Projector When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality.
  • Page 18 To connect to a DVD player/recorder and Blu-ray Disc player equipped with HDMI output You can enjoy better picture quality by connecting a DVD player/recorder and Blu-ray Disc player equipped with HDMI output to the HDMI input of the projector. Right side of the projector : Video signal flow HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered...
  • Page 19 To connect to a VCR equipped with the S video connector or video connector You can connect a DVD player/recorder, hard disk video recorder, VCR or laser disk player, which is not equipped with component video connectors. See also the instruction manual of each equipment.

  • Page 20: Connecting To A Computer

    Connecting to a Computer Right side of the projector HD-Dsub15 pin cable (optional) or HDMI cable (optional) : Video signal flow Set “Input-A Signal Sel.” in the Setup not appear properly, set it to “Computer.” (1 page 48, 56) Note If you set your computer, such as a notebook type, to output the signal to both computer’s display and this equipment, the picture of the equipment may not appear properly.

  • Page 21: Step 3: Adjusting The Picture Position

    Step 3: Adjusting the Picture Position Project an image on the screen and then adjust the picture position. Remote control detector (ON/STANDBY), INPUT, LENS, MENU, and M/m/</,/ENTER (joystick) buttons on the side panel of the projector function the same as those on the remote control. Note Depending on the installation location of the projector, you may not control it with the remote control.
  • Page 22 LIGHT INPUT Flashes in green for a few seconds, and DYNAMIC STANDARD CINEMA then lights in green. LIGHT INPUT DYNAMIC STANDARD CINEMA Tips • You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting the Menu Language”.
  • Page 23 The picture moves up by a maximum of 65% of the screen size from the center of the lens. 120” 971 mm (38 100” 809 mm (31 (When using the 16:9 screen. For more details, see page 15.) You can also adjust the horizontal position of the lens. For detailed information, see “Making Fine Adjustments to the Horizontal Picture Position”...
  • Page 24 When “Lens Control” is set to “Off” on the Installation and the focus. (1 page 50) When “Test Pattern” is set to “Off” on the Function (1 page 49) ENTER LENS ADJ PIC MENU To adjust the tilt of the installation surface If the projector is installed on an uneven surface, use the adjusters to keep the projector level.

  • Page 25: Step 4: Selecting The Menu Language

    Step 4: Selecting the Menu Language You can select one of 16 languages for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. LIGHT INPUT DYNAMIC...
  • Page 26 LENS ADJ PIC MENU WIDE MODE RESET REAL COLOR PROCESSING ENTER Press MENU. The menu appears. Press M/m to select the Setup menu, and press , or ENTER. The setting items of the selected menu appears.
  • Page 27 ENTER ENTER Press M/m to select “Language,” and press , or ENTER. Press M/m/</, to select a language, and press ENTER. The menu changes to the selected language. To clear the menu Press MENU.

  • Page 28: Projecting

    Projecting This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste. Projecting the Picture on the Screen LIGHT INPUT DYNAMIC...

  • Page 29: Turning Off The Power

    Turning Off the Power Press the (ON/STANDBY) switch. A message “POWER OFF?” appears on the screen. Press the (ON/STANDBY) switch again. The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat. First, the ON/STANDBY indicator flashes quickly, during which you will not be able to light up the ON/STANDBY indicator with the Confirm that the fan stops running and the ON/STANDBY indicator lights in red.

  • Page 30: Selecting The Wide Screen Mode

    Selecting the Wide Screen Mode You can enjoy various wide screen modes according to the video signal received. You can also select it using the menu. (1 page 45) LIGHT INPUT DYNAMIC STANDARD PICTURE MODE USER 1 USER 2 ENTER LENS ADJ PIC WIDE MODE...
  • Page 31 Letterbox picture with side panels Letterbox picture Notes • You can adjust the vertical position of the picture with “V Center” in the Screen when “Zoom” is selected. (1 page 46) • You can adjust the position of the subtitles with “Vertical Size” in the Screen “Zoom”...

  • Page 32: Selecting The Picture Viewing Mode

    Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of program or room conditions. LIGHT INPUT DYNAMIC STANDARD CINEMA PICTURE MODE PICTURE MODE buttons USER 1 USER 2 USER 3 DYNAMIC STANDARD CINEMA ENTER USER 1, USER 2...

  • Page 33: Adjusting The Picture Quality

    Adjusting the Picture Quality You can adjust the picture quality that suits your taste by selecting the adjustment items with the remote control. The adjusted data can be stored in each picture mode. LIGHT INPUT DYNAMIC STANDARD CINEMA PICTURE MODE USER 1 USER 2 USER 3...
  • Page 34 Example: To adjust the contrast For details on each adjustment, see the Picture menu. (1 page 41) Make the setting or adjustment on an item. When changing the adjustment level To increase the value, press ,. To decrease the value, press <. When changing the setting Press M/m to change the setting.

  • Page 35: Adjusting The Picture Using Real Color Processing

    Adjusting the Picture Using Real Color Processing The Real Color Processing (RCP) feature allows you to adjust the color and hue of each target of the projected picture you specify independently. You can thus obtain a picture more suitable to your taste. Freeze the scene of the video source when you are adjusting the picture using Real Color Processing.
  • Page 36 There are some limitations on selection of position and range. 2 Press to select “Position” or “Range,” and specify it more delicate color and color range you want to adjust using < Adjust the color of the specified portions. Press to select “RCP Color”...

  • Page 37: Using The Menus

    Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus The projector is equipped with an on-screen menu for making various adjustments and settings. Some of the adjustable/setting items are displayed in a pop-up menu, in a setting menu or adjustment menu with no main menu, or in the next menu window.
  • Page 38 LENS ADJ PIC MENU WIDE MODE RESET REAL COLOR PROCESSING ENTER Press MENU. The menu window appears. Press M/m to select a menu item, and press , or ENTER. The items that can be set or adjusted with the selected menu appear. The item presently selected is shown in yellow.
  • Page 39 ENTER Pop-up menu Setting items Setting menu Adjustment menu Next menu window Setting items Press M/m to select an item you want to set or adjust and press , or ENTER. The setting items are displayed in a pop-up menu, in a setting menu, in an adjustment menu or in the next menu window.
  • Page 40 Make the setting or adjustment of an item. When changing the adjustment level To increase the value, press M/,. To decrease the value, press m/<. Press ENTER to restore the original screen. When changing the setting Press M/m to change the setting. Press ENTER to restore the original screen.

  • Page 41: Picture Menu

    Picture Menu The Picture menu is used for adjusting the picture. Picture Mode You can select the picture viewing mode that best suits the type of picture or the environment. Dynamic: Select this for enhanced picture contrast and sharpness to reproduce color tones.
  • Page 42 Cinema Black Pro Advanced Iris Switches the iris function during projection. Auto 1: .Automatically switches to an optimum iris according to a projected scene. The contrast of the scene is emphasized most. Auto 2: An optimum iris becomes smaller than when set to “AUTO 1”. The contrast of the scene becomes reduced.
  • Page 43 NR (Noise Reduction) Reduces the roughness or noise of the picture. Usually, select “Off”. If the picture is rough or noisy, select a setting from among “Low”, “Middle” or “High” according to the input signal source. DDE (Dynamic Detail According to the film source you have selected, make a setting for Enhancer) playback.

  • Page 44: Advanced Picture Menu

    Advanced Picture Menu The Advanced Picture is used for adjusting the picture more. RCP (Real Color You can adjust the color and hue of each selected portion of the Processing) picture independently. User 1, User 2, User 3: You can adjust the picture using Real Color Processing and store the settings.

  • Page 45: Screen Menu

    Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc. Wide Mode (When the You can set the aspect ratio of the picture to be displayed for the image input signal is current input signal.
  • Page 46 Screen Area Selects the size of the picture when a Hi-Vision picture is overscanned. Full: Expands the picture on the whole of the screen. Through: Does not expands the picture on the whole of the screen. Note This item is effective only when a Hi-Vision signal (preset memory Nos. 7, 8, 9, 12, 13 and 14) is input and “On”...

  • Page 47: Setup Menu

    Setup Menu The Setup menu is used to change the factory preset settings, etc. Status Sets whether or not the on-screen display is displayed. Set to “Off” to turn off the on-screen displays except for the menus, message when turning off the power, and warning messages. Language Selects the language used in the menu and on-screen displays.
  • Page 48 Input-A Signal Sel. Selects the type of signal input from the equipment connected to the INPUT A connector. Selects the type of signal input from the equipment by selecting “Input-A” with the INPUT button. Auto: Selects the input signal type automatically. Computer: Inputs the signal from a computer.

  • Page 49: Function Menu

    Function Menu The Function menu is used for changing the settings of the various functions of the projector. Auto Input Search Detects the input signal and displays the detected input signal automatically when the INPUT button is pressed. When set to “On”, the projector detects whether a Component, HDMI 1, HDMI 2, Video, S-video or Input-A signal is input when the input terminal with effective signals is automatically selected by pressing INPUT.

  • Page 50: Installation Menu

    Installation Menu The Installation menu is used for changing the installation settings. V Keystone Corrects the vertical trapezoidal distortion of the picture. When the bottom of the trapezoid is longer than the top ( When the top of the trapezoid is longer than the bottom ( Note Depending on the picture position adjusted with the lens shift feature, the aspect ratio of the picture may change from the original...
  • Page 51 Blanking This feature allows you to adjust the displayable region within the four directions of the screen. Select each screen edge “left / right / up / bottom” on the Blanking adjustment screen with M / m buttons. Adjust the desired Blanking value with <...

  • Page 52: Information Menu

    Information Menu The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. Model name Displays the model name (VPL-VW50) and the serial number. fH (horizontal frequency) Displays the horizontal frequency of the input signal.

  • Page 53: Troubleshooting

    This section describes how to solve the problems, how to replace the lamp and air filter, etc. Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy The power is not turned on.
  • Page 54 Symptom Cause and Remedy The picture flickers. c Activate “APA”, then adjust the current input signal. c Adjust “Phase” for “Adjust Signal” in the Screen On-screen display Symptom Cause and Remedy c Set “Status” in the Setup On-screen display does not appear.

  • Page 55: Warning Indicators

    ON/STANDBY flashes in red. (A repetition rate of 6 flashes) Note When a warning indicator other than the above starts flashing, consult with Sony Customer Information Service Center. (1 page 57) lamp. (1 page 57) cools, and then turn on the power again.

  • Page 56: Message Lists

    Message Lists Warning messages Message Cause and Remedy c Turn off the power. High temp.! Lamp off in 1 min. c Check to ensure that nothing is blocking the ventilation holes. c Frequency is out of range. Input a signal that is within the Frequency is out of range! c Set “Input-A Signal Sel.”...

  • Page 57: Replacing The Lamp And The Air Filter And Cleaning The Ventilation Holes (Intake)

    Replacing the Lamp and the Air Filter and cleaning the Ventilation holes (intake) Tools you need to get started: Standard Phillips screwdriver Cloth (for scratch protection) The lamp used for the light source has a certain lifespan. When the lamp dims, the color balance of the picture becomes strange, or “Please replace the Lamp/Filter.”...
  • Page 58 Loosen the three screws on the lamp with the Phillips screwdriver. Hold up the cover release lever, then pull the lamp straight out. Ensure you push the new lamp all the way, then securely tighten those three screws on the lamp. Put the cover release lever back.
  • Page 59 Attach the new air filter so that it fits into the each claws (10 positions) on the filter holder. Note Attach the Air Filter aligning it with the shape of the filter holder. Also, do not touch the fan after removing the air filter that is set deep inside the projector.

  • Page 60: Cleaning The Air Filter

    Cleaning the Air Filter When “Please clean the filter.” appears on the screen, you should clean the air filter. The air filter should be cleaned every 1,500 hours. This value varies depending on the environment or how the projector is used. 1,500 hours are approximate.

  • Page 61: Specifications

    Specifications System Projection system SXRD panel, 1 lens, projection system LCD panel 0.61-inch SXRD panel 6,220,800 pixels (2,073,600 pixels × 3) Lens 1.8 times zoom lens (electric) f18.7 to 33.7 mm/F2.54 to 3.53 Lamp 200 W Ultra High Pressure Lamp Projection picture size 40 to 300 inches (measured diagonally)

  • Page 62: Supplied Accessories

    Supplied accessories Remote control RM-PJVW100 (1) Size AA (R6) batteries (2) AC power cord (1) Lens Cap (1) Operating Instructions (1) CD-ROM (ImageDirector2) (1) Design and specifications are subject to change without notice. Safe regulations UL60950, CSA No. 950, FCC class B, IC class B, EN60950 (DEMKO), CE, C-Tick Optional accessories Projector Lamp LMP-H200 (for replacement)

  • Page 63: Preset Signals

    Warning on power connection Use a proper power cord for your local power supply. The United States, Canada Plug type YP-3 Female end YC-13 Cord type Rated Voltage 10A/125V & Current Safety approval UL/CSA * Use a rated plug that complies with the regulation of each country/region and the specifications. Preset Signals The following table shows the signals and video formats which you can project using this unit.
  • Page 64 Memory Preset signal 1080/24p 1080/24p 640 × 350 VGA-1 (VGA350) 31.469 VESA 85 (VGA350) 640 × 400 NEC PC98 VGA-2 (TEXT)/ VESA70 VESA 85 (VGA400) 640 × 480 VESA 60 Mac 13 VESA 72 VESA 75 (IBM VESA 85 (IBM 800 ×...
  • Page 65 Preset memory numbers for each input signal Analog signal Signal Video signal (VIDEO INPUT and S VIDEO INPUT connectors) Component signal (INPUT A and Y C connectors) Video GBR signal (INPUT A connector) Computer signal (INPUT A connector) Digital signal Signal Component signal (HDMI1, 2 connectors) Video GBR signal (HDMI1, 2 connectors)

  • Page 66: Input Signals And Adjustable/Setting Items

    Input Signals and Adjustable/Setting Items Some of the items in the menus cannot be adjusted depending on the input signal. The following tables indicate them. The items that cannot be adjusted are not displayed in the menu. Item Video or S-Video (Y/C) Advanced Iris Lamp Control...
  • Page 67 Screen menu Item Video or S-Video (Y/C) Wide Mode Over Scan – Screen Area * – V Position V Size – Phase – Pitch – Shift – z : Adjustable/can be set – : Not adjustable/cannot be set *: This item is effective only when “Over Scan” is set to “On” in the Screen Input signal Component Video GBR...

  • Page 68: Ceiling Installation

    Ceiling Installation Use the PSS-H10 or PSS-610 Projector Suspension Support when you install the projector on a ceiling. The projection distances for ceiling installation are shown below. When Using the PSS-H10 Projector Suspension Support a: Distance between the screen and the installation hole at the ceiling side of the ceiling mount unit (front side) x: Distance between the ceiling and the center of the screen such that the picture will not be truncated or blocked...
  • Page 69 When using the 16:9 aspect ratio screen Screen Size (inches) a Minimum 1403 2033 2663 Distance (104 Maximum 2296 3372 4448 Distance (132 (175 x Minimum Distance Maximum Distance To calculate the installation measurements (SS: Screen Size) a (minimum) = 31.5 (1 ) ×...
  • Page 70 For details on installation on a ceiling, refer to the Installation manual for Dealers of the PSS-H10. Make sure to consult with a qualified Sony personnel for installation. The installation measurements are shown below when installing the projector on a ceiling using the PSS-H10.

  • Page 71: Front View

    Front view 150 (6) 75 (3) 197.5 (7 395 (15 Side view Center of the lens Front of the cabinet Ceiling 175 (7) Center of the supporting pole 93.5 (3 Center of the lens 197.5 (7 191.3 (7 130 (5 236.3 (9 235.1 (9 471.4 (18...

  • Page 72: When Using The Pss-610 Projector Suspension Support

    When Using the PSS-610 Projector Suspension Support a: Distance between the screen and the installation hole of the upper ceiling mount bracket (front side) b: Distance from the ceiling to the bottom surface of the unit x: Distance between the ceiling and the center of the screen such that the picture will not be truncated or blocked Center of the screen When using the 16:9 aspect ratio screen...

  • Page 73: Top View

    For details on installation on a ceiling, refer to the Installation manual for Dealers of the PSS-610. Make sure to consult with a qualified Sony personnel for installation. The installation measurements are shown below when installing the projector on a ceiling using the PSS-610.
  • Page 74 Front view Distance between the ceiling and the surface of the mount bracket Using adjustment pipe (b): 150/175/200 mm (6 / 7 / 7 Using adjustment pipe (c): 250/275/300 mm (9 250 (9 125 (5) 197.5 (7 395 (15 Side view Center of the lens Front of the cabinet inches)

  • Page 75: Making Fine Adjustments To The Horizontal Picture Position

    Making Fine Adjustments to the Horizontal Picture Position Tools you need to get started Phillips screwdriver: 110 mm (4 Flat-head screwdriver: 110 mm (4 Note For details on how to make fine adjustments of the horizontal picture position, consult with qualified personnel.
  • Page 76 Insert a flat-blade screwdriver into the lens adjustment groove located at the left bottom (when the projector projects the image when placed on the floor, on a desk, etc.), and turn it in the direction in which you want to move the lens. If you turn it to the left, the lens moves to the left, and if you turn it to the right, the lens moves to the right.
  • Page 77 After you have decided the lens position, insert the Philips screwdriver at the locations of the four screws around the border of the lens in turn and tighten them to fix the lens in place. Attach the ring (washer) by turning it clockwise. Note When you use the horizontal and vertical lens shift features at the same time and adjust the horizontal lens shift to the maximum, the picture moves up to a maximum of 53% of its original position.

  • Page 78: Index

    Index Adjust Signal Phase ... 46 Pitch ... 46 Shift ... 46 Adjuster ... 24 Adjusting picture position ... 21 picture quality ... 33 Advanced Iris ... 42 Auto Input Search ... 49 Background ... 49 Black Level Adj..43 Blanking ...
  • Page 79 Screen Area ...46 Selecting the menu language ...25 Sharpness ...42 Specifications ...61 Standby Mode ...47 Status ...47 Supplied accessories ...11 Troubleshooting ...53 V Keystone ...50 WIDE MODE ...30 Wide Mode Full ...45 Full 1 ...45 Full 2 ...45 Normal ...45 Wide Zoom ...45 Zoom ...45...
  • Page 80 Printed on 100% recycled paper. Halogenated flame retardants are not used in cabinets and printed wiring boards. Corrugated cardboard is used for the packaging cushions. Sony Corporation Printed in Japan...

Table of Contents