Sony VPL-VW50 Operating Instructions Manual page 22

LIGHT INPUT
DYNAMIC STANDARD CINEMA
LIGHT INPUT
DYNAMIC STANDARD CINEMA
Tips
• You can select the desired language for the menu screen. For details, refer to "Step 4: Selecting
the Menu Language". (1 page 25)
• When "Auto Input Search" is set to "On" in the Function
effective signals is automatically displayed by pressing INPUT. (1 page 49)
ENTER
LENS ADJ PIC MENU
Tip
When "Lens Control" is set to "Off" on the Installation
picture position. (1 page 50)
When "Test Pattern" is set to "Off" on the Function
(1 page 49)
22
Flashes in green for
a few seconds, and
then lights in green.
2
Press the / (ON/STANDBY)
? 1
switch to turn on the projector.
The ON/STANDBY indicator flashes
in green, and then lights in green.
When the ON/STANDBY indicator
flashes, "Starting..." appears on the
screen.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of
the connected equipment.
4
Press INPUT to project the
picture on the screen.
Each time you press the button, the
input indication and equipment to be
projected change. (1 page 28)
menu, the input terminal with
5
Adjust the vertical picture
position.
Press the LENS button repeatedly until
the Lens Shift adjustment window (test
pattern) appears. Then select the proper
vertical position by pressing the M/m/
</, buttons. Each time you press
the LENS button, the LENS adjustment
window appears in order.
To move the position upward, press
M / , .
To move the position downward,
press m / < .
menu, you cannot adjust the vertical
menu, the test pattern is not displayed.