Advertisement
■
Updating procedure
1. Turn the BR-900CD on while
holding [STOP] and [PLAY]
simultaneously.
Please keep holding down the buttons until
below message appears on the display.
CD Program Load
Insert DISC.
2. Press the EJECT button on the
CD-R/RW drive to open the disc
tray.
3. Put the UPDATE CD on the tray
and close.
BR-900CD will automatically start
loading the program files and the
message "Update PROGRAM? Ver
*.** to 2.10" will be shown on the
display.
Update PROGRAM?
Ver *.** to 2.10
4. Press the [ENTER/YES] to start
updating.
* If you would like to cancel the
update, please press [EXIT/NO].
5. The display will show the
message "Update Ver 2.10 Are
you sure?" If you are sure you
would like to proceed updating,
please press [ENTER/YES]
again.
The update will start and the
message "Keep power on" will be
appeared on the display.
3
Advertisement
