Advertisement
Quick Links
Version 2.10 UPDATE CD
INSTRUCTION FOR SYSTEM
Certain malfunction in storing data into the memory card has been detected.
Some parts of song data on the BR-900CD may rarely become unusable due
to this defeat. We highly recommend our customers to update the system
program of the BR-900CD according to this instruction. We sincerely
apologize for any inconvenience caused by this.
You may find another INSTRUCTION sheet for update attached to the BR-900CD.
But please be sure to update your BR-900CD with using this "BR-900CD Version
2.10 UPDATE CD."
© 2008 BOSS CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of BOSS CORPORATION.
BR-900CD
BR-900CD
PROGRAM UPDATE
1
Advertisement
Related Manuals for Roland BR-900CD
Summary of Contents for Roland BR-900CD
- Page 1 PROGRAM UPDATE Certain malfunction in storing data into the memory card has been detected. Some parts of song data on the BR-900CD may rarely become unusable due to this defeat. We highly recommend our customers to update the system program of the BR-900CD according to this instruction. We sincerely apologize for any inconvenience caused by this.
- Page 2 (IMPORTANT) problems due to the power-off during the updating may corrupt the system of Please be sure not to turn the BR-900CD the BR-900CD and make it unusable. If off while updating. Unforeseen problems this occurred, please contact the local due to the power-off during the updating Roland Service.
- Page 3 ■ Updating procedure BR-900CD will automatically start loading the program files and the 1. Turn the BR-900CD on while message “Update PROGRAM? Ver *.** to 2.10” will be shown on the holding [STOP] and [PLAY] display. simultaneously. Update PROGRAM? Ver *.** to 2.10 Please keep holding down the buttons until below message appears on the display.
- Page 4 * If you would like to cancel the update, please press [EXIT/NO]. * Never turn the BR-900CD off while updating. 6. When the update is completed, the display indicates “Completed! Please restart.” 7. Turn off the BR-900CD and then turn its power on again.