Switching Off Smoothly After Presentation (Off & Go); Using The Security Function; Security Lock (Password) - Sony VPL-DX10 Operating Instructions Manual

Switching off
Smoothly after
Presentation (Off &
Go)
You can disconnect the power cord
immediately after turning off the unit. So
you can move it readily if necessary.
Notes
• Turn off the projector according to the
procedure explained in "Turning Off the
Power" on page 28, then cool it down before
storing the projector in the carrying case.
• When the power is turned on soon after it has
been turned off, it may take some time until
the lamp will light on.
Switching off Smoothly after Presentation (Off & Go) / Using the Security Function
Using the Security
Function

Security Lock (Password)

The projector is equipped with a security
lock function. When you turn the power of
the projector on, you are required to input
the previously set password. If you do not
input the correct password, you will not be
able to project the picture.
Notes
• When the security lock becomes effective,
you are required to input the password only
when you turn the projector on after
disconnecting or reconnecting the cable.
• You will not be able to use the projector if
you forget your password and the password
administrator is not available. Be please
aware that using the security lock can prevent
valid usage in such cases.
33