Turning Off The Power - Sony VPL-DX10 Operating Instructions Manual

Turning Off the
Power
1
Press the ?/1 key.
"POWER OFF? Please press ?/1 key
again." appears to confirm that you want
to turn off the power.
Note
The message disappears if you press any
key other than the ?/1 key, or if you do not
press any key for five seconds.
2
Press the ?/1 key again.
The ?/1 key flashes in green and the fan
continues to run to reduce the internal
heat.
3
Unplug the AC power cord from the
wall outlet after the fan stops running
and the ? /1
key
when using the Off & Go)
This product can be turned off without
waiting for the fan to stop after your
presentation has finished (Off & Go).
For details, see "Switching off Smoothly
after Presentation (Off & Go)" on page
33.
When you cannot confirm the on-
screen message
When you cannot confirm the on-screen
message under certain conditions, you can
turn off the power by holding the ?/1 key for
about two seconds instead of above steps 1
and 2.
To project again immediately
You can make the lamp light by turning on
the power again even, while the ?/1 key is
flashing in green. There may be a delay,
depending on conditions, before the lamp
lights.
28

Turning Off the Power

lights in red. (Except