Using The "Further Programme Preset" Function - Sony KP-48PS1 Instruction Manual

Menu System

Using the "Further Programme Preset" function

With this feature you can:
a) Individually attenuate the strength of a channel signal in case of a strong local aerial signal (striped picture).
b) Individually adjust the volume level of each channel.
c) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a better picture
reception if the picture is distorted.
d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way
a connected VCR records the unscrambled signal.
1
VIDEO TV
2
3
1 2 3
4
4 5 6
7 8 9
5
0
PROGR
MENU
6
RM 892
S
7
Press the MENU button on the remote control to display the menu
on the screen.
Push the joystick to $ to select the
enter the Set Up menu.
Push the joystick to $ or 4 to select Manual Set Up then push to z
to enter.
Push the joystick to $ or 4 to select Further Programme Preset,
then push to z.
Push the joystick to $ or 4 to select the relevant programme
number, then push to z repeatedly to select:
a) ATT (RF attenuator)
b) VOL (Volume Offset)
c) AFT (Automatic Fine Tuning) or
d) DECODER
The selected item changes colour.
a) ATT
Push the joystick to $ to select On, then press the OK button.
Repeat steps 5 and 6 a) to attenuate other channels.
b) VOL
Push the joystick to $ or 4 to adjust the volume level of the channel
over a range of -7 to +7, then press the OK button. Repeat steps 5
and 6b) to adjust the volume level of the other channels.
c) AFT
Push the joystick to $ or 4 to fine tune the channel frequency over
a range of -15 to +15, then press the OK button. Repeat steps 5 and
6c) if you wish to fine tune other channels.
d) DECODER
Push the joystick to $ or 4 to select AV1 (for a decoder connected
to the Scart :1/ ) or AV2 (for a decoder connected to the Scart
:2/q 2 (SMARTLINK)), then press the OK button.
Repeat steps 5 and 6d) to select the AV1 or AV2 output for other
programme positions.
The picture from the decoder connected to the Scart connector
:1/ or :2/q 2 (SMARTLINK) on the back of the
projection TV will appear on this programme number.
Press the MENU button to exit and return to the normal TV screen.
Your projection TV is now ready for use.
symbol, then push to z to
Picture Adjustment
Picture Mode Personal
Contrast
Brightness
Colour
Sharpness
Reset
AI
On
Noise Detection
On
Digital Mode
DRC 50
Select: Enter Menu:
Set Up
Auto Tuning Start
Programme Sorting
- - - - - - -
Select NexTView
AV Preset
Manual Set Up
Select: Start Auto Tuning
Set Up
Auto Tuning
Programme Sorting
- - - - - - -
Select NexTView
AV Preset
GB
Manual Set Up
Select: Enter:
Manual Set Up
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
- - - - - - -
Personal ID
Demo
Select: Enter:
Further Programme Preset
PROG ATT VOL AFT DECODER
1 Off 0 On Off
2 Off 0 On Off
3 Off 0 On Off
4
5
6
7
8
9
10
11
Select: Enter:
PROG ATT VOL AFT DECODER
1 Off
On
PROG ATT VOL AFT DECODER
1 On
- 5
PROG ATT VOL AFT DECODER
1 On -5
2
PROG ATT VOL AFT DECODER
Off
1 On -5 2
AV1
AV2
19
Menu System