Notes On Adjusting The Convergence Manually - Sony KP 46WT520 Operating Instructions Manual

Notes on
Adjusting the
Convergence
Manually
42
❑
Allow the TV to warm up for about 30 minutes before you adjust
the convergence.
❑
For best results, stand about 3 to 5 feet back from the picture
when adjusting the convergence. Begin with the crosses in the
center area of the screen and, once those are adjusted, move to the
crosses on the edges of the screen.
❑
You can make separate adjustments in the each of the following
viewing modes:
❑
For standard-definition (480i/480p) sources:
, and
Normal/Full
❑
For high-definition (720p/1080i) sources:
modes (see page 54); in Twin View (see page 55).
Zoom
In each of these viewing modes, the cross pattern looks different,
but the adjustment procedure is the same.
❑
To optimize the conditions for convergence adjustment, in the
Video Menu, set
Mode
settings (see page 62).
❑
You can reset the adjustments by pressing the
remote control.
modes (see page 53).
Zoom
to or and lower the
Pro Movie
,
Wide Zoom
, , and
Full Wide Zoom
level
Picture
button on the
RESET