Satellite Receiver And Vcr - Sony KP 46WT520 Operating Instructions Manual

Satellite Receiver
and VCR
Using
S VIDEO jacks?
See page 23.
Notes on Using This Connection
To Do This ...
Watch the satellite receiver
Watch the VCR
Set up the TV remote control
to operate the satellite
receiver or VCR
Activate the TV remote
control to operate the satellite
receiver or VCR
Control satellite receiver and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
30
To connect a satellite receiver and VCR
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's VHF/UHF jack.
3
Use a coaxial cable to connect the splitter's other output jack to
the satellite receiver's VHF/UHF input jack.
4
Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
5
Use a coaxial cable to connect the satellite receiver's VHF/UHF
output jack to the VCR's VHF/UHF input jack.
6
Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
7
Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
8
Run Auto Program, as described in "Setting Up the Channel List"
on page 39.
Do This ...
Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 3 in
the illustration).
Press TV/VIDEO repeatedly to select VCR input (VIDEO 1 in the illustration).
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See "Programming the Remote Control" on pages 46-47.
For the satellite receiver, press
DVD/VCR FUNCTION.
See "Operating a Satellite Receiver" on page 48 and "Operating a VCR" on
page 48.
See the instructions for setting up Video Labels on pages 72-73.
SAT/CABLE FUNCTION. For the VCR, press