Dvd Player With Component Video Connectors - Sony KP 46WT520 Operating Instructions Manual

DVD Player with
Component
Video Connectors
DVD player
Notes on Using This Connection
To Do This ...
Watch the DVD player
Set up the TV remote control
to operate the DVD player
Activate the TV remote
control to operate the DVD
player
Control DVD functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
32
For best results, use this connection if your DVD player has
component video (Y, P
To connect a DVD player with component video connectors
1
Use component video cables to connect the DVD player's Y, P
and P jacks to the Y, P
R
✍
The Y, P and P
B R
C and C , or Y, B-Y and R-Y. If so, connect the cables to like colors.
B R
2
Use an audio cable to connect the DVD player's audio output
jacks to the TV's VIDEO 5 audio input jacks.
Component video cables
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Do This ...
TV/VIDEO
Press repeatedly to select the DVD input (VIDEO 5 in the
illustration).
If you have a non-Sony DVD player, you must program the remote control.
See "Programming the Remote Control" on pages 46-47.
Press DVD/VCR FUNCTION.
See "Operating a DVD Player" on page 49.
See the instructions for setting up Video Labels on pages 72-73.
✍
You cannot record the signal from any equipment connected into the Y, P
P jacks.
R
, P ) jacks.
B R
and P jacks (VIDEO 5) on the TV.
B R
jacks on your DVD player are sometimes labeled Y,
Audio cable
B
TV
,
B