Setting Up The Channel List; Using Auto Program - Sony KP 46WT520 Operating Instructions Manual

Setting Up the Channel List

Using Auto
Program
After you finish connecting the TV, you need to run the Auto
Program feature, which automatically creates a list of available
channels. The Auto Program screens appear when you turn on your
TV for the first time after hooking it up.
To run Auto Program the first time you turn on your TV
1
Press to turn on the TV.
POWER
The Initial Setup screen appears.
2
When prompted to start Auto Program, press the
start Auto Program.
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on page 67.
To reset the TV to factory settings
1
Press to turn on the TV.
POWER
2
Hold down on the remote control.
RESET
3
Press on the TV. (The TV will turn itself off, then back
TV POWER
on.)
4
Release .
RESET
button to
CH+
39