Chapter 4 Appendix; Production Of Branch Cable For Linear Servo Motor - Mitsubishi Electric Melservo MR-J5 Series User Manual

4
APPENDIX
4.1

Production of branch cable for linear servo motor

Produce the branch cable using MR-J3THMCN2 connector set as shown in the connection diagram in the following section.
Page 63 MR-J4THCBL03M branch cable
The branch cable length should be 0.3 m or less.
Parts
MR-J3THMCN2 connector set
Cable
*1 Supplier: Toa Electric Industrial
4 APPENDIX
66
4.1 Production of branch cable for linear servo motor
Description
Receptacle: 36210-0100PL
Shell kit: 36310-3200-008 (3M)
or
Connector set: 54599-1019 (Molex)
Plug: 36110-3000FD
Shell kit: 36310-F200-008 (3M)
ETFE-SVP 40/0.08 mm (AWG#24 or equivalent) × 6P (Bando Densen) (between CN2 and MOTOR)
VSVC 7/0.18 mm × 2C (AWG#26 or equivalent) (Bando Densen) (between CN2 and SCALE)
*1
*1