Linear Encoder Manufactured By Heidenhain; Lc 495M/Lc 195M (Absolute Type) - Mitsubishi Electric Melservo MR-J5 Series User Manual

1.4

Linear encoder manufactured by Heidenhain

Precautions
• When the absolute position detection system is configured, the absolute position battery is not required.

LC 495M/LC 195M (absolute type)

Precautions
• This linear encoder is of four-wire type. When using this linear encoder, change the servo parameter to select the four-wire
type. Refer to the following.
MR-J5-A User's Manual (Parameters)
MR-J5-G/MR-J5W-G User's Manual (Parameters)
Cable structure
Prepare a cable based on the following configuration diagram.
■For the linear servo motor
• MR-J5-_/MR-J5W_-_G
(6)
MR-J5-_
CN2
or
MR-J5W_-_G
Branch cable
CN2A
CN2
CN2B
*1
CN2C
Condition Branch cable
When using an optional (5) MR-J4THCBL03M
Page 63 MR-
encoder cable
J4THCBL03M branch cable
When fabricating an
encoder cable

When not using a branch
cable
*1 The connection to CN2C is for the MR-J5-_ 3-axis servo amplifier. MR-J5-_ 2-axis servo amplifier does not have CN2C.
*2 It should be prepared by the customer.
*3 For connectors for thermistor signals, change the connection method depending on the customer's system.
Encoder cable 2
Encoder cable 1
(1)
(2)
(5) SCALE
Thermistor of linear servo motor
*3
THM
Encoder cable
(1) Options manufactured by Heidenhain
573661-××_m
(2) Connector set MR-J3CN2
Page 25 Encoder cable 1
(6) Connector set MR-J3CN2
Page 26 Encoder cable 2
(3)
Thermistor of linear servo motor
Linear encoder
LC 495M/LC 195M
(4) Output cable
(3)
*2
*2
(3) Junction connector
17-pin coupling
(female)291697-
26(Heidenhain)
1.4 Linear encoder manufactured by Heidenhain
Output cable
LC 495M/LC 195M
(4) 547300-×× _m
*2
(Heidenhain)
1 LINEAR ENCODER
23
1