Connecting A Satellite Receiver With A Vcr - Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual

Connecting a Satellite Receiver with a VCR

Rear of LCD projection TV
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VC-810S/820S/830S
(not supplied)
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Connect the CATV cable to the VCR's VHF/UHF IN jack.
3
Using a coaxial cable, connect the VCR's VHF/UHF OUT jack to the
LCD projection TV's CABLE jack.
4
Using AUDIO and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO
IN jacks.
5
Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT jacks to the LCD projection TV's AUDIO and S VIDEO
IN jacks.
Coaxial cable
S VIDEO
S video cable (not supplied)
Installing and Connecting the LCD Projection TV
Satellite receiver
S video cable
(not supplied)
VCR
CATV Cable
Satellite
antenna
cable
VC-810S/
820S/830S
(not
supplied)
(Continued)
37