Analog Mode; Connections - Sony UP-970AD Instructions For Use Manual

Analog Mode

Connections

Notes
• Turn off the power to each device before making any
connections.
• Connect the AC power cord last.
• After completing connections, switch to the analog
mode before turning on the printer.
• The printer will not print images imported via the USB
terminal.
12
Connections
Video equipment
to video output
connector
Connecting cable
(BNC y BNC)
(not supplied)
Connecting cable
(not supplied)
to
VIDEO
IN
to VIDEO OUT
to REMOTE
75 Ω select
a)
switch
RM-91 remote control unit
(not supplied)
a) Set the 75 Ω select switch as follows.
ON: When nothing is connected to the VIDEO OUT
connector, set the switch to this position.
OFF: When a video monitor or other video equipment is
connected to the VIDEO OUT connector, set the switch
to this position.
Color/black and
white video monitor
to video input
connector
to -
AC IN
AC power
cord (not
supplied)
to wall outlet