5-1. Service Mode
1. Construction
Service mode is composed as follows. ADJUST is added by entering the adjust mode.
. COLOR ADJUST
. GRAY ADJUST
. THRESHOLD
. TOTAL PRINT
. ERROR RESET
. TEST PATTERN
. MANUAL MECHA
. ROM Ver
. PRINTER SELF CHECK
. ADJUST
2. Entering Method
The unit can be entered in service mode by turning on the power switch while [←] and [→] keys on the
front panel are depressed. In service mode, ordinary operations are possible. Service mode can be
released by turning off the power switch.
3. Content
When entering the service mode, LCD indication becomes as follows.
READY
A4
OR
LET
In above condition, entering in menu by pressing [MENU] key.
. COLOR ADJUST (Adjustment of R, G, B, DARK, LIGHT, SHARPNESS, GAMMA or selection of
lamination pattern)
This is as same as usual menu content.
. GRAY ADJUST (Adjustment of gray balance)
This is as same as usual menu content.
UP-D70XR
Section 5
Service Mode
QTY
1S
5-1