Decommissioning And Disposal - Omega TCL-3M165E2 Series User Manual

Decommissioning and disposal

9 Decommissioning and disposal
CAUTION! Risk of injury!
Never remove the device from a measurement set up in operation.
 Make sure that the measurement set up is shut down professionally.
Before decommissioning:
Prior to decommissioning, ensure that
 the measurement set up is switched off and is in a safe and de-energized state.
 the calibrator and the accessories have completely cooled down ( § 4.4 "Switching on,
cool down and").
Decommissioning:
 Remove all connected sensors and devices.
 Switch off the calibrator and disconnect the power plug
 Empty the calibrator tank in case there is residual calibration liquid ( § 8.2 "Cleaning").
Disposal calibration liquid:
IMPORTANT! Disposal calibration liquid!
Dispose of the calibration liquid in accordance with the Technical Safety Data Sheet.
Calibrator Disposal:
NO HOUSEHOLD WASTE!
The TCL-3M165E2 series of calibrators consists of various different materials. It must not
be disposed of with household waste.
 Take the TCL-3M165E2 to your local recycling plant
- 54 -
Series TCL-3M165E2