Mixing Down Tracks - Zoom LiveTrak L-20R Operation Manual

Mixing down tracks

A final stereo mix can be recorded to the master track.
Signals are sent to the master track after passing through the master fader.
Mixing down to the master track
1.
Tap to open the recorder panel.
2.
Tap to turn it on (lit red).
NOTE
• Adjust the volume and panning of each recorded track before starting.
• When mixing down, set the sampling rate to 44.1 kHz or 48 kHz.
If the sampling rate is 96 kHz,
3.
Tap the MASTER
4.
Tap to return to the beginning.
5.
Tap to start recording standby.
cannot be set to ON.
repeatedly until the button lights red.
CHANGE PANEL button
63
STOP button
PLAY button
REC button
OVERDUB button
MASTER REC/PLAY
button
REW button