Troubleshooting - Zoom LiveTrak L-20R Operation Manual

Troubleshooting

General
The unit and L-20 Control are not connecting
• Confirm that a ZOOM wireless adapter (e.g. BTA-1) has been installed in the unit.
• Confirm that the ZOOM wireless adapter (e.g. BTA-1) has not become disconnected.
• Confirm that the iPad Bluetooth setting is on.
• Open L-20 Control, tap
There is no sound or output is very quiet
• Check the speaker connections and volume settings on the speakers.
• Check instrument and mic connections
• When using a condenser mic, turn
• Confirm that the SIG indicators are lit green.
• Confirm that
• Raise all the channel faders and the master fader, and confirm that the level meters are lit.
• Confirm that the MASTER
Recorded audio is too loud, too quiet or silent
• Adjust input gains and confirm that SIG indicators are lit green.
• When using a condenser mic, turn
• When recording to an SD card, confirm that
Recording is not possible
• When recording to an SD card, confirm that
• Confirm that the SD card has open space.
• When recording to an SD card, confirm that the project is not protected (to prevent overwriting).
in the toolbar, and confirm that
on.
is unlit.
is unlit or lit red.
on.
is shown.
is lit red.
is lit red.
113