Recording/Overdubbing And Playing Tracks - Zoom L-8 LiveTrak Quick Manual

Recording/overdubbing and playing tracks

The has recorder functions that enable simultaneous recording of up to 12 tracks and
simultaneous playback of up to 10 tracks. The input signals of every channel and from the
master fader output can be recorded and played back.
Recording
3
5
6
1.
Press
2.
Use to turn overdubbing on or off.
• Lit (ON): Overwrite the current project
• Unlit (OFF): Create a new project and record in it
3.
Press
4.
Press to light it and start recording standby.
HINT
If a recorded file already exists in the current project, and
ate a new project and then start recording standby.
5.
Press to light it and start recording.
6.
Press to stop recording.
NOTE
When recording stops, "Please wait" appears on the display. Do not turn the power off or re-
move the SD card while this message appears. Doing so could cause data loss or malfunction.
HINT
See the Operation Manual for information about punching in/out, automatic recording and
pre-recording.
to light it.
for the channels you want to record, lighting them red.
is off, pressing
12
2
4
1
will cre-