Troubleshooting - Zoom LiveTrak L-20 Operation Manual

Troubleshooting

General
There is no sound or output is very quiet
• Check the speaker connections and volume settings on the speakers.
• Check instrument and mic connections.
• When using a condenser mic, turn
• Confirm that the SIG indicators are lit green.
• Confirm that is unlit.
• Raise all the channel faders and the master fader, and confirm that the level meters are lit.
• Confirm that the MASTER
Recorded audio is too loud, too quiet or silent
• Adjust input gains and confirm that SIG indicators are lit green.
• When using a condenser mic, turn
• When recording to an SD card, confirm that
Recording not possible
• When recording to an SD card, confirm that
• Confirm that the SD card has open space.
• When recording to an SD card, confirm that the project is not protected (to prevent overwriting).
"Write Error" appears and recording properly is not possible./ Stop-
ping recording takes an excessive amount of time.
• SD cards can become worn out. Speed can decrease after repeated writing and erasing.
• Formatting the card with this unit might improve this. (→
• If formatting an SD card does not improve this, we recommend replacing the card. Please check the list
of cards that have been confirmed to work on the ZOOM website.
NOTE
This is not a guarantee of specific SD card recording performance for SDHC/SDXC cards that have been
confirmed to work.
This list is provided as a guideline to help find suitable cards.
Playback sound cannot be heard or is quiet
• When playing data from an SD card, confirm that
• Raise the faders on the playback channels, and confirm that the level meters are lit.
on.
is unlit or lit red.
on.
is lit red.
is lit red.
96
"Formatting SD cards"
is lit green.
on P84)