Setting The User Name - Sony PEG-SJ22 CLIE Handbook (primary manual) Operating Instructions Manual

Note
Make sure that you directly connect the USB cable to the USB port of your computer.
The HotSync
computer via a USB hub.
Step 3: Setting the user name
1
Connect your CLIÉ handheld to your computer.
2
Rotate the Jog Dial™ navigator to select [HotSync] icon
on the Application Launcher screen and press the Jog
Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
3
Tap the
The HotSync
software starts automatically.
4
When the New User dialog box is displayed on your
computer screen, enter your user name.
Enter a user name that you prefer.
Note
When you have already used another CLIÉ handheld
Every CLIÉ handheld should have a unique name. To prevent loss of user's records,
never try to synchronize more than one CLIÉ handheld to the same user name.
Tip
When you transfer data between CLIÉ handhelds
Refer to "Transferring data with another Sony CLIÉ™ handheld" in "Handbook."
5
Click OK on your computer screen.
A beep sounds and the HotSync
Your user name selected in step 4 is registered for your CLIÉ handheld.
When the HotSync
HotSync
42
®
operation may not be performed normally if you connect it to your
icon.
®
operation starts and the installation for the necessary
®
process is complete, the message showing the
®
operation completion is displayed on your CLIÉ handheld.
®
operation starts.