Performing The Initial Settings Of Your Sony Clié™ Handheld - Sony PEG-SJ22 CLIE Handbook (primary manual) Operating Instructions Manual

Step 2: Performing the initial settings of
your Sony CLIÉ™ handheld
The first time you turn on your CLIÉ handheld, you are required to make initial
settings. Follow the on-screen instructions to configure the initial settings and
to get accustomed to operations on your CLIÉ handheld.
1
Press the POWER button.
Your CLIÉ handheld turns on, and the Welcome screen is displayed.
Press the POWER button
Tips
If you cannot turn on your CLIÉ handheld
• Did you charge your CLIÉ handheld following the steps on page 15?
b
For details, refer to "Troubleshooting Q&A."
• If you cannot turn on your CLIÉ handheld even after charging it, perform a soft
reset (page 30).
2
Take out the Stylus.
You can use the stylus to enter
data and to select applications.
Notes
• Always use the point of the stylus for tapping or making strokes on your CLIÉ
handheld screen. Never use a real pen, pencil, or other sharp object to write on
the screen.
• When you put the stylus back in the holder of your CLIÉ handheld, push it in
until it clicks into place.
b
Take out the Stylus
Continued on next page
• • • • • • • • • • • • • • • • • • • •
17