Panasonic KX-TDA30 Getting Started page 25

Assigning the BRI Setting (Automatic Configuration)
1. a.
Double-click "Configuration".
b.
Double-click "Slot".
c.
Change the status of the BRI card to OUS.
d.
Click [Cancel].
Click "Tool" → "BRI Automatic Configuration"
2.
from the menu bar.
3. a.
Click "Check" to turn on the BRI card.
b.
Click [OK].
4. a.
Type the Subscriber Number for the desired
ports.
b.
Click [Execute].
ISDN line data such as P-P/P-MP, TEI Mode
are automatically set.
c.
Click "Check Box" of the desired ports.
d.
Click [Data Apply].
e.
Click [Close].
5. a.
Double-click "Slot".
b.
Change the status of the BRI card to INS.
c.
Click [Cancel].
4.3 Programming the Hybrid IP-PBX
Getting Started 25