Panasonic KX-TDA30 Getting Started page 20

Hybrid ip-pbx

Hide thumbs Also See for KX-TDA30:

Table of Contents

3.1 Starting the Hybrid IP-PBX

Turn on the power switch. The RUN indicator will flash.

Notes

•

For safety reasons, follow the procedures as indicated when turning on the Hybrid IP-PBX.

•

For safety reasons, do not stretch, bend, or pinch the AC cord and the DC cable of the AC

adaptor.

While the RUN indicator is flashing, return the System Initialise Switch to the "NORMAL"

position. Depending on the configuration, initialisation takes about 1 min to 3 min. If successfully

executed, the RUN indicator will stop flashing and be kept lit.

All data will be cleared and the Hybrid IP-PBX will be initialised to the default values. The DPTs should

show the time as 01:00.

Note

Use the same types of AC adaptor and AC cord that are supplied with the Hybrid IP-PBX only.

Getting Started

Power Switch

Table of Contents