8
Mounting the synchroniser
.01.07
4
Fig. 8 - 07
8
Assembling the anti-tipping device
.01.08
Fig. 8 - 08
Set-up and Initial Commissioning
2
1
3
2
O Insert the position finger 1 into the
machine housing and tighten it with the
screw 2.
O Slide the synchroniser 3 onto the shaft
so that the position finger 1 is positioned
in the groove of the synchroniser 3, see
arrow.
O Tighten the screws 4.
O Plug the synchroniser into the adapter
(see chapter 8.02 Connecting the plug-
in connections and ground cable).
Switch off the machine!
Risk of injury due to accidental
machine start-up!
O Screw on the anti-tipping device 1 included
in the accessories with the screws 2.
Do not operate the machine
without the anti-tipping device 1!
Risk of injury by crushing
between the sewing head and
the table top!
1
23