BBV RX100 Installation Manual page 25

Sony dome interface receiver installation guide
Hide thumbs Also See for BBV RX100:
Table of Contents

Advertisement

BBV Rx 100
Application Notes
Variable speed Pan/Tilt.
Zoom/Focus, Autofocus
16 full scene presets
2 preset patrols
4 alarm inputs driving to preset 1 - 4
Dome Pattern definition and playback
Advanced Features
Display dome menu (preset 95)
Enter within menu (iris open)
Pattern define start
Pattern define stop
To record a Pattern, direct the camera to the required starting position. Hold '#' and tap 'AUTOPAN'. The dome will now record pan/tilt
and lens movement up to a time limit. To stop the recording, hold '#' and tap 'LIGHTS'. To play the recorded Pattern, press the AUTOPAN
key only. The dome will repeatedly run the Pattern until either the joystick is moved or an alarm occurs.
(The example shows Tx1000 keystrokes, please substitute the keystroke for the controller used.)
Menu access:
Use '#' WASH to display menu. Navigate using the joystick and IRIS OPEN to select. When used with control systems without iris keys,
eg DM Digital Sprite Lite, use *889 003 or *889 10 10 3
Return to home: Can be programmed from the Dome menu.
RS485 control of dome. Data rate, 9600 Baud, No parity, 8 Data bits, 1 Stop bits
Connection details:
Dome
Description
RX-
RS485(B) input
RX+
RS485(A) input
Notes:
The alarm output relay opens for approx 5 seconds upon power up. This can be used to signal power loss, etc.
Check with the DM multiplexer manual for exact procedure for entering * commands.
Dome settings: Select dome address 1, P-MODE PROTOCOL and 9600, N, 8, 1.
Link J6/1-2 is used to select the function that is used to drive the Esprit AUX outputs.
Function
Link fitted Esprit AUX No
LIGHTS
WIPER
2
WASHER
3
Link J6/4-5 is used to enable 5 minute datum time to start preset patrol.
Link fitted = datum disabled and link removed = datum enabled.
Rx100 installation manual V1.17 29 Aug 08.doc
Interface Receiver
Addendum to manual for the following dome:
Pelco Spectra (P-mode RS485 protocol)
Rx100 software RX1_P2V10
Tx1000
Tx400
'#' WASH
'#' 1
'#' WIPE
'#' 2
'#' AUTOPAN
'#' 3
'#' LIGHTS
'#' 4
Rx100
J3/C1
J3/C2
Link removed Esprit AUX No
1
DM-Sprite
DM-DSL/DS/DS2
*889 002
*889 10 10 2
*889 003
*889 10 10 3
*889 004
*889 10 10 4
*889 005
*889 10 10 5
2
1
3
Page 25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents