Table of Contents
Advertisement
3
Touch a tab for editing the desired parameters.
Filter
EQ
Effect
Chorus/Reverb
Pan/Volume
4
Set the value of each parameter.
5
Save your Mixer settings.
To save the Panel 1/2 Mixer settings:
Register them to Registration Memory (page 87).
To save the Style 1/2 Mixer Settings:
Save them as a Style file to the User drive or USB flash drive. If you want to recall
the settings for future use, select the Style file saved here.
1
Call up the operation display via [MENU] [Style Creator].
2
Touch [Save] to call up the Style Selection display, and then save as a Style
file (page 33).
To save the MIDI Song Ch 1–8 / 9–16 Mixer Settings:
When editing and saving the MIDI Song Channel settings, a different operation is
needed. For details, see "Editing and Saving the MIDI Song Ch 1–8 / 9–16 Mixer
Settings" below.
Editing and Saving the MIDI Song Ch 1–8 / 9–16 Mixer Settings
First select a MIDI Song, and edit the parameters. Second, register the edited settings as part of the MIDI Song data
(Setup), and then save the Song to the User drive or USB flash drive. If you want to recall the settings for future use, select
the Song file saved here.
1
Call up the operation display via [RECORDING] MIDI [Multi
Recording].
2
Touch the Song name "New Song" to call up the Song Selection
display, and then select the desired Song.
3
Edit the desired parameters, according to "Basic Procedure for
the Mixer" (page 80) steps 1–4.
4
Press the [RECORDING] button to call up the MIDI Multi Record-
ing display again.
5
Register the edited settings to the MIDI Song.
5-1
Touch [Setup] to call up the Setup display.
5-2
Touch [Execute] to register the edited settings as part of the MIDI Song data.
6
Touch [Save] to call up the Song Selection display, and then
save as a Song file (page 33).
For adjusting Resonance, and Cutoff (sound brightness).
For adjusting equalization parameters to correct the tone or tim-
bre of the sound.
For selecting an Effect type and adjusting its depth for each part.
For selecting a Chorus/Reverb type and adjusting its depth for
each part.
For adjusting panning and volume for each part.
NOTE
To reset each parameter to the default
value, touch the number value or set-
ting and hold it.
PSR-SX900/SX700 Owner's Manual
5
81
Advertisement
Table of Contents
