Figure 5-1 Pump Seal Kit Placement - Henny Penny KFC Velocity Open Series Service Manual

5 5 . . 1 1 4 4 F F i i l l t t e e r r P P u u m m p p M M o o t t o o r r S S e e a a l l R R e e p p l l a a c c e e m m e e n n t t
The filter pump and filter motor must be seperated for this procedure, see
Pump Motor Replacement , page
motor assembly, which can damage the motor. With the new filter motor on a flat
sturdy work surface, using seal kit 17476, install the pump seal components on to the
new filter pump motor as shown in
12. Install the two screws connecting the
filter pump to the face of the filter
motor.
13. Place the new pump motor onto the
mounting plate so the hanger bolts
rest on the top lip and slide down so
the studs are in line with the holes in
the pump motor base.
14. Use a 1/2 inch wrench to secure the
pump motor to the mounting plate.
15. Use
reconnect the lines to the correct
port of the pump motor.
59. The oil seals prevent oil from migrating into the
Figure 5-1 Pump Seal Kit Placement , page

Figure 5-1 Pump Seal Kit Placement

an adjustable wrench
5.13 Filter
61.
to
61