Maintenance - Genie Z-40/23N Operator's Manual

Second Edition • Second Printing
Observe and Obey:
Only routine maintenance items specified in this
manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Use only Genie approved replacement parts.
Dispose of materials in accordance with
governmental regulations.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Part No. 1258834
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position,
then visually inspect the sight gauge located on
the side of the hydraulic oil tank. Add oil as
needed.
Result: The hydraulic oil level should be at the
mark on the side of the hydraulic tank.
FULL
Hydraulic oil specifications
Hydraulic oil type
Z-40/23N • Z-40/23N RJ
Operator's Manual

Maintenance

Chevron Rykon
Premium MV equivalent
39