Safety Information
Safety and Informational Decals
This unit is equipped with safety and informational decals
displaying pictorial symbols. These symbols and decals
are described below. Locations are identified in
1.
ID
Decal
A
B
C
D
1
2
3
E
F
2
Contact an IASD for a replacement if a decal is missing,
damaged, or illegible.
Figure 1-
Description
Meaning
Oil Drain
Oil drain location
Positive Battery Cable
•
•
•
Negative Battery Cable
Identifies negative battery cable
Fuel Selection
Step 1: Unit set for Natural Gas (NG) operation.
Step 2: Press and rotate fuel selector 180° to change
fuel type.
Step 3: Unit set for Liquid Propane (LPG) operation.
NOTE: This decal is intended to be discarded after
installation and need not be replaced if missing.
Shock Hazard / Read
•
The Manual
•
•
Burn Hazard /
Asphyxiation Hazard
•
Electricity is present. Keep positive terminal covered
at all times when connected to battery.
Read and understand the manual completely before
using this equipment.
Identifies positive battery cable.
Live components carrying potentially lethal voltages
may be accessible inside. Render the equipment
safe before attempting further access.
Read and understand manual completely before
attempting further access.
Surface may be hot. Do not touch when operating
equipment. After equipment shutdown, allow
sufficient time for surfaces to cool prior to contact.
Carbon monoxide, a colorless odorless poisonous
gas, is emitted in engine exhaust while equipment is
running. Avoid inhalation of exhaust gases.
Owner's Manual for 50 Hz Air-Cooled Generator Sets