Sony Net MD Walkman MZ-N1 Service Manual page 20

MZ-N1
2. NV adjusted values modifying procedure
1) Select manual mode of the test mode, and set item number
336 (see page 14).
Remote commander LCD display
336
: Adjusted value
[VOLUME +]
2) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 8.
3) Press the key to write the adjusted value.
X
4) Select manual mode of the test mode, and set item number
149 (see page 14).
5) Press the > key to set item number 151.
Remote commander LCD display
151
: Adjusted value
[VOLUME +]
6) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 07.
7) Press the key to write the adjusted value.
X
8) Select manual mode of the test mode, and set item number
861 (see page 14).
Remote commander LCD display
861
: Adjusted value
[VOLUME +]
9) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 79.
10) Press the X key to write the adjusted value.
11) Select manual mode of the test mode, and set item number
862 (see page 14).
Remote commander LCD display
862
: Adjusted value
[VOLUME +]
12) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 00.
13) Press the key to write the adjusted value.
X
14) Select manual mode of the test mode, and set item number
863 (see page 14).
Remote commander LCD display
863
: Adjusted value
[VOLUME +]
15) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes EA.
16) Press the key to write the adjusted value.
X
17) Select manual mode of the test mode, and set item number
864 (see page 14).
Remote commander LCD display
864
: Adjusted value
[VOLUME +]
18) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 01.
20
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
19) Press the key to write the adjusted value.
X
20) Select manual mode of the test mode, and set item number
865 (see page 14).
Remote commander LCD display
865
: Adjusted value
[VOLUME +]
21) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 2C.
22) Press the key to write the adjusted value.
X
23) Select manual mode of the test mode, and set item number
866 (see page 14).
Remote commander LCD display
866
: Adjusted value
[VOLUME +]
24) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes B9.
25) Press the X key key to write the adjusted value.
26) Select manual mode of the test mode, and set item number
867 (see page 14).
Remote commander LCD display
867
: Adjusted value
[VOLUME +]
27) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes C9.
28) Press the X key to write the adjusted value.
29) Select manual mode of the test mode, and set item number
868 (see page 14).
Remote commander LCD display
868
: Adjusted value
[VOLUME +]
30) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 80.
31) Press the key to write the adjusted value.
X
32) Select manual mode of the test mode, and set item number
871 (see page 14).
Remote commander LCD display
871
: Adjusted value
[VOLUME +]
33) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes CA.
34) Press the key to write the adjusted value.
X
35) Select manual mode of the test mode, and set item number
872 (see page 14).
Remote commander LCD display
872
: Adjusted value
[VOLUME +]
36) Adjust with the
UME --]
key (adjusted value down) so that the adjusted value
becomes 2D.
37) Press the X key to write the adjusted value.
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or
[VOL-
key (adjusted value up) or