3-9.
HOLDER ASSY
5 Remove the holder assy
in the direction of arrow D .
1 Open the holder assy.
A
3-10. DC MOTOR (SLED) (M602)
4 two screws (M1.4)
5 DC motor (sled) (M602)
D
4 convex portion
2 washer (0.8-2.5)
B
2 Push the convex portion toward the
direction B and open the holder assy
toward the direction A to erect uprightly.
3 Remove the concave portion
C
in the direction of arrow C .
3 gear (SA)
1 Remove six solders
of the motor flexible board.
MZ-N1
11