Sony Net MD Walkman MZ-N1 Service Manual page 18

MZ-N1
Example1: When the
>
Remote commander LCD display
000
: AD value of the remote commander key
(hexadecimal 00 to FF)
Example2: When the
N >
is pressed:
Remote commander LCD display
000
: AD value of the remote commander key
(hexadecimal 00 to FF)
4. When all the keys on the set and on the remote commander are
considered as OK, the following displays are shown for 4 sec-
onds.
Example1: When the keys on the set are considered as OK:
Remote commander LCD display
888
: AD value of the remote commander key
(hexadecimal 00 to FF)
Example2: When the keys on the remote commander are con-
sidered as OK:
Remote commander LCD display
888
: AD value of the remote commander key
(hexadecimal 00 to FF)
5. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back.
18
key on the set is pressed:
key on the remote commander