Recording On An Md - Sony MDS-JE500 Operating Instructions Manual

Basic Operations
Basic Operations

Recording on an MD

Monitor audio during recording
Even if you set REC MODE to
MONO, the monitor signal does
not become monaural.
6
2
POWER
TIMER
REC OFF PLAY
1
Turn on the amplifier and play the program source you want to
record.
2
Press POWER.
The POWER indicator changes from red to green.
3
Insert a recordable MD.
If the MD has a recorded material on it, the deck will
automatically start recording from the end of the last recorded
track.
4
Set INPUT to the corresponding input connector.
To record through
DIGITAL IN
LINE (ANALOG) IN
5
Set REC MODE to the mode you want to record in.
To record in
Stereo sound
Monaural sound*
* In the monaural recording, you can record about two times longer than in
3
AMS (PUSH ENTER)
≠ ±
DISPLAY/CHAR
§ EJECT
NO YES
EDIT
With the label side up
With the arrow
pointing this way
the stereo recording.
5
4
REC LEVEL
SCROLL PLAY MODE REC MODE INPUT
STEREO DIGITAL
REPEAT
0 )
MONO ANALOG
0 10
PHONES PHONE LEVEL
·
P p p p p p p r
REC REC
MIN
MAX
6 7
8
Set INPUT to
DIGITAL
ANALOG
Set REC MODE to
STEREO
MONO