Locating A Particular Point In A Track; Playing Tracks Repeatedly - Sony MDS-JE500 Operating Instructions Manual

Playing MDs
Locating a Particular Point in a
Track
You can also use 0 and ) to locate a particular
point in a track during playback or playback pause.
To locate a point
While monitoring the
sound
Quickly by observing
the display during
playback pause
Notes
• If the disc reaches the end while you are pressing )
during playback pause, "OVER" appears in the display.
Press 0 (or =) or turn AMS counterclockwise to go
back.
• If the disc reaches the end while you are pressing )
during sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
18
0/)
≠ ±
0 )
0 10
§
EJECT
· P p r
REC
Press
) (forward) or 0 (backward)
and keep pressing until you find
the point.
) or 0 and keep pressing
until you find the point. There is
no sound output during this
operation.

Playing Tracks Repeatedly

You can play tracks repeatedly in any play mode.
≠ ±
0 )
0 10
§ EJECT
·
P p r
REC
REPEAT
Press REPEAT.
"REPEAT" appears in the display.
The deck repeats the tracks as follows:
When the MD is
The deck repeats
played in
Normal play (page 8) All the tracks
Shuffle Play (page 19)
All the tracks in random order
Program Play (page 20)
The same program
To cancel repeat play
Press REPEAT several times until "REPEAT" disappears.
The deck returns to the original playing mode.
Repeating the current track
While the track you want to repeat is playing in normal
play, press REPEAT several times until "REPEAT 1"
appears in the display.
6
REPEAT
A˜B
· P p
= + r
0 )
)