Playing An Md - Sony MDS-JE500 Operating Instructions Manual

Basic Operations

Playing an MD

2
POWER
TIMER
REC OFF PLAY
You can locate and play back
a track while the deck is
stopped
1 Turn AMS (or press =
or +) until the number
of the track you want to
play appears.
2 Press AMS or ·.
To use headphones
Connect them to PHONES
jack. Use PHONE LEVEL to
adjust the volume.
8
3
AMS (PUSH ENTER)
§ EJECT
1
Turn on the amplifier and set the source selector to the position
for MD deck.
2
Press POWER.
The POWER indicator changes from red to green.
3 Insert an MD.
With the arrow
pointing this way
Press ·.
4
The deck starts playing. Adjust the volume on the amplifier.
To
Stop playing
Pause playing
Go to the next track
Go to the preceding track
Take out the MD
≠ ± REC LEVEL
REC MODE INPUT
DISPLAY/CHAR SCROLL PLAY MODE
STEREO DIGITAL
REPEAT
0 )
MONO ANALOG
0
PHONES PHONE LEVEL
NO YES
· ·
P p r
EDIT
REC
4
With the label side up
Do the following:
Press p.
Press P. Press the button again or press
· to resume playing.
Turn AMS clockwise (or press + on
the remote).
Turn AMS counterclockwise (or press
= on the remote).
Press § EJECT after stopping playing.
10
Adjust the
headphone
MIN MAX
volume.
Connect the
headphones.