Panasonic SA-DK10 Service Manual page 20

SA-DK10
8.6. Disassembly and assembly of the Disc Tray
Step 2 With lifting the claw in the direction of arrow 1, draw the
clamp SW P.C.B. in the direction of arrow 2.
Step 3 Remove the mechanism cover.
Step 4 Insert the gear with hexagonal wrench into the hole.
Step 5 Rotate the hexagonal wrench in the direction of arrow
(clockwise), and then open the disc tray fully.
Step 6 Upset the CD changer unit again.
Step 7 Release both the claws, and then draw the disc tray.
20