Panasonic SA-DK10 Service Manual page 19

8.5. Disassembly and assembly of the Traverse Unit
Step 1 Push the lever from position A to B.
Step 2 Pull the stopper (black) in the direction of arrow 1 and
push the lever in the direction of arrow 2.
Step 3 Push the stpeer (black) down until the white lever eject
out.
Step 4 Lift up the traverse unit and slide out the unit as shown.
• Replacement of Traverse Unit
Step 1 Place the traverse unit as shown.
Step 2 Press in the lever shaft in the direction of arrow 1 as
shown and push the traverse unit into the position in the
direction of arrow 2.
Step 3 Pull the stopper in the direction of arrow 1 and release
the lever in the direction of arrow 2 as shown.
Step 4 Pull out the tray half way and push it back fully.
Step 5 Push the lever to the initial position indicated 'I---I'.
19
SA-DK10