Specifications For Dielectric Tests, Safety Class And Degree Of Protection - Siemens SIMOTION D410 Manual

Technical data

6.6 Specifications for dielectric tests, safety class and degree of protection

6.6 Specifications for dielectric tests, safety class and degree of protection
Test voltages
Insulation resistance is verified with a routine test with the following test voltage according to
IEC 61131-2:
Table 6-10
Circuits with rated voltage U
ground
0 V < U
Safety class
Safety class I according to VDE 0106 Part 1 (IEC 536), i.e., protective ground terminal
required.
Protection against the ingress of foreign matter and water
Front panel: Safety class IP65 according to IEC 60529
Rear panel: Safety class IP00 according to IEC 60529
66
Test voltages
relative to other circuits or
e
≤ 50 V
e
Test Voltage
500 V DC
Manual, 03/2007 Edition
D410