Appendices; Standards; Information On Insulation Tests, Safety Class, And Degree Of Protection; A.1 Standards - Siemens SIMOTION D4 Series Equipment Manual

Appendices

A.1

Standards

IEC 1131
The SIMOTION programmable controller meets the requirements and criteria of the
Standard IEC 1131, Section 2.
CE Designation
Our products meet the general and safety-related requirements of the following EC
guidelines and conform to the uniform standards (EN) for programmable controllers
published in the official gazettes of the European Union:
89/336/EEC "Electromagnetic Compatibility" (EMC guideline)
The EU declaration of conformity is part of this manual; note the corresponding reference.
EMC guideline
SIMOTION products are designed for industrial use.
Table A-1
Application range
Industry
UL approval
Recognized component mark for Canada and the United States Underwriters Laboratories
(UL) in accordance with Standard UL 508, File 16 4110
A.2

Information on insulation tests, safety class, and degree of protection

Test voltages
During the routine test, the insulation resistance is tested at the following test voltage in
accordance with IEC 1131 Part 2:
D4xx
Manual, 12.2004, 6AU1900-1AJ32-0BA0
Electromagnetic compatibility (EMC)
Requirements for
Radio interference
EN 61000-6-4
Immunity to noise
EN 61000-6-2 : 1999
A
A-1