Selecting The Listening Position - Sony MDX-C8970R Operating Instructions Manual

5
Press (2) (T) or (5) (t) to select the
desired frequency.
62 Hz 157 Hz 396 Hz
y y
2.51 kHz 6.34 kHz
y
6
Rotate the dial to select the desired
level.
If you want to change the equalizer curve to
be adjusted at this time, press (2) (T)
repeatedly until the equalizer curve name
apppears to return to step 3.
To restore the factory-set equalizer curve,
press (6) (ENTER) for two seconds.
7
Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode appears.
Selecting the listening
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
center of the sound field no matter where you
sit in the car.
Display
window
POS
All
1 2
POS
Front
POS
Front-R
3
POS
Front-L
POS
Rear
POS
off
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
1.00 kHz
y y
16.0 kHz
y
Centre of sound
field
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
Cancel
2
Press (SOUND) repeatedly until "POS"
appears.
3
Rotate the dial to select the desired
listening position.
All y Front y Front-R y Front-L y Rear y
off
The listening positions appear in the order
shown above.
To cancel the POS mode, select "off."
After three seconds, the display returns to
the normal playback mode.
Adjusting the listening position
1
Press (SOUND) for two seconds.
2
Press (SOUND) repeatedly until "POS"
appears.
3
Press (5) (t).
4
Rotate the dial to adjust the centre of
the sound field to the left or right.
Centre moves to the L (left).
Centre moves to the R (right).
To restore the factory-set listening position,
press (6) (ENTER) for two seconds.
5
Press (5) (t).
continue to next page t
27