When The Power Was First Turned On After Installation - Sony PCS-1 System Integration Manual

1-4-6. When the Power was First Turned on
after Installation
When you turn on the Communication Terminal for the
first time after installation and the self-diagnosis is
completed, the setup wizard appears on the monitor screen.
Register your local system data with the setup wizard using
the Remote Commander.
n
You can change the settings made with the setup wizard
later using the Setup menus.
1. Select the language used for the on-screen menus and
messages in the Language Setup Wizard.
Language: Select one of seven languages; English,
French, German, Japanese, Spanish, Italian, Chinese.
Language Setup Wizard
Language
2. Use the , , or button on the Remote
Commander to select "Next", then press the PUSH
ENTER button.
The ISDN Setup Wizard appears.
n
When you are not using the ISDN line, select "Next"
to display the LAN Setup Wizard, then proceed to step
9.
1-14
English
Next Cancel
3. Set the following items on the ISDN line.
ISDN Setup Wizard
Country/Region
Country/Region Code
Protocol
Previous
Country/Region:
Select your country or region.
Country/Region Code:
Enter your country code or region code with the
number buttons on the Remote Commander.
Protocol:
Select the protocol of the ISDN line you are using.
4. Use the , , or button to select "Next", then
press the PUSH ENTER button.
USA
1
National ISDN
Next Cancel
PCS-1/PCS-1P