Getting The Most Out Of Dolby Pro Logic Surround - Sony SLV-AV100C Operating Instructions Manual

Getting the most out
of Dolby Pro Logic
Surround sound
To obtain the best possible Dolby Pro Logic Surround sound, you need
to adjust the delay time. The center mode and speaker levels were set in
EASY SET UP, so you don't have to change those settings unless you
change the speaker configuration.
If you change the speaker configuration, see "Reconfiguring the
PROLOGIC and THEATER sound fields" on page 82.
Adjusting the delay time
You can make the surround sound more effective by delaying the
output from the rear speakers (delay time) relative to the front speakers.
You don't have to adjust the delay time if you select 3CH LOGIC for
CENTER MODE.
MENU
EXECUTE
1
Repeat steps 1 through 4 in
"Using the pre-programed sound
CURSOR
>/./?//
fields" on page 49 and select
PROLOGIC in step 3.
2
Press CURSOR >/./?// to move
the cursor (I) to SUR EDIT, then
highlight DELAY.
3
Press EXECUTE, then press CURSOR
?// to select 15ms, 20ms, 25ms,
or 30ms as the delay time.
Make the delay time longer when you
have placed the rear speakers in a small
room or close to your listening position,
and make it shorter when you have
placed them in a large room or far from
your listening position.
4
Press MENU to return to the
original screen.
SOUND SET
SOUND FIELD PRO LOGIC
BASS BOOST ON
TONE EDIT
SUR EDIT LEVEL
CENTER MODE
TEST TONE
SELECT :
SET : , EXECUTE
SOUND SET
SOUND FIELD PRO LOGIC
BASS BOOST ON
TONE EDIT
SUR EDIT LEVEL
CENTER MODE
TEST TONE
SELECT
:
SET : EXECUTE
SUR EDIT DELAY
DELAY 20ms
RETURN
SELECT :
SET :
Sound Field Operations
OFF
DELAY
OFF
DELAY
77