Getting Started; Charging And Installing The Battery Pack - Sony CCD-TR44 Operation Manual

Getting Started
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the battery
pack, use the supplied AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1) Connect the AC power adaptor to the w'all outlet.
(2)
Align the right side of the battery pack with the line on the AC pow'er adaptor, then slide the battery
pack in the direction of the arrow.
(3)
Set the selector to CHARGE, The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the mains, and then
remove the battery pack and install it on the camcorder.
Charging Time
Battery pack NP-33
(supplied)
NP-98/98D
NP-80/80D
NP-68/66H NP-C6S
Charging
time*
60 215 190 125 105
mom
* Approximate minutes to charge an empty ck usijig the supplied AC power adaptor (Lower
temperatures require a longer charging time.)
7