Selecting The Equipment - Sony SLV-AV100C Operating Instructions Manual

Audio/Video Equipment
Operations
Selecting the
equipment
1 2 3
4 5 6
7 8 9
0
> 10
MASTER VOLUME
Function buttons
You can control the connected audio and video equipment with this
remote commander. Before operating any equipment, press the function
button corresponding to the equipment. Note that all equipment must
be made by Sony to control with the remote commander.
Controlling the function buttons
The function buttons of the remote commander have the following three
roles.
SYSTEM OFF
• Turning on the unit and related piece of equipment (excluding audio
components).
• Switching the input source.
Function • Switching the remote commander to operate the selected equipment
buttons
(see the sections for controlling each piece of equipment from page 62
to 74).
To change the input source, you can also use the function buttons on the
unit.
MASTER VOL
The following tables show the relationship between the function buttons
+/–
(on the remote commander and unit) and the input source.
MUTING
Function buttons on the remote commander (SYSTEM CONTROL/
FUNCTION)
Press
VHS TUNER
VHS LINE
VIDEO1
VIDEO2
1
TV*
CD
TUNER
TAPE/MD
1
* If the TV is connected to the unit with only the antenna cable, the unit's speakers
do not reproduce the sound even if you press this button. When you use the TV
tuner, press TV CONTROL ON (see "Controlling other TVs with the remote
commander" on page 65).
* 2 "TV" usually doesn't appear on the TV screen. If another monitor is connected to
the MONITOR VIDEO OUT jack, "TV" appears on the monitor screen.
MUTING
The following
indication appears on
the TV screen
channel number
LINE
VIDEO1
VIDEO2
2
(TV)*
CD
TUNER
TAPE/MD
Audio/Video Equipment Operations
And the unit's input switches
to the
Unit's VCR
LINE (VIDEO IN, AUDIO L/R
IN) jacks
VIDEO1 (VIDEO IN, AUDIO L/R
IN) jacks
VIDEO2 INPUT (VIDEO, AUDIO
L/R) jacks
TV (VIDEO, AUDIO L/R IN) jacks
CD (AUDIO L/R IN) jacks
Unit's FM/AM tuner
TAPE/MD (AUDIO L/R IN) jacks
59